Category: Control Systems

Posted on by

Enhancing Efficiency with a Spreadsheet: Calculating Gallons per Minute and Speed for Sprayers

Reading Time: 2 minutes

Hey there, fellow sprayers!

We hope this email finds you well and ready for another knowledge-packed episode of Texas Industrial Remcor, Inc. YouTube channel. In this latest video release, our very own host, Jeff Mattke, dives deep into the world of spray pressure and gallons per minute to help you nail your unique spraying applications!

Now, you’re probably wondering, what’s in it for me? Well, here are 5 key takeaways that you can expect from this episode:

1. The importance of spray pressure: Jeff explains why 40 psi is regarded as the industry standard and its impact on nozzle flow rates.

2. Boomless versus nozzle sprayers: Discover the surprising pressure spike difference between boomless sprayers and traditional sprayers with individual nozzles spaced at 20 inches.

3. The flow rate made easy: Get ready for a user-friendly spreadsheet that will assist you in calculating gallons per minute, gallons per acre, and even your speed!

4. The power of speed measurement: Learn how to calibrate your system effectively by measuring short distances and clocking your travel time.

5. Turbocharge your calculations: Understand how our rudimentary spreadsheet simplifies repetitive calculations, saving you time and effort.

Fun fact from the episode: Did you know that boomless spray nozzles can cover a significantly larger area than sprayers with individual nozzles? Talk about efficiency!

In conclusion, we at Texas Industrial Remcor, Inc. are thrilled to share this valuable information with all our dedicated sprayers out there. As Jeff mentions, our aim is to speed up your calculations and make these formulas accessible to you, so you can fine-tune your spraying systems and achieve remarkable results in no time.

But wait, there’s more! We invite you to head over to our YouTube channel and watch the full video to grasp these concepts visually. Don’t forget to hit the like button and subscribe to stay updated with our latest releases.

So, buckle up and let Jeff Mattke be your guide as he unravels the mysteries of spray pressure and gallons per minute. Get ready to take your spraying game to a whole new level!

Until next time, happy spraying!

Best regards,

Texas Industrial Remcor, Inc.

🌐 Visit our website: www.sprayervalves.com

📺 Watch the video: https://youtu.be/u_ttc2QtmbI

📧 Contact us: [email protected]

📞 Call us: 254-982-4236

Posted on by

Find the Perfect Spray System for Your Needs

Reading Time: 2 minutes

Hey there Texas Industrial Remcor fans,

We’ve got a brand new video out that’s going to answer a question we frequently get from our customers: “Which particular spray system do I need for my sprayer?” In this episode, our very own Jeff Mattke breaks it all down for you, providing some valuable insight to help you make an informed decision.

Let’s dive right into the five key takeaways you can expect from this episode:

1. The two crucial variables: Jeff highlights the importance of considering the pressure and gallons per minute when determining the right spray system for your needs. These variables will vary based on your unique requirements, so understanding them is essential.

2. Per valve basis: Jeff explains how our systems at Texas Industrial Remcor are described on a per valve basis. This information becomes handy when you’re looking at specific valve specifications, allowing you to make accurate calculations.

3. The cautionary note: Discover why it’s suggested not to size your application any closer than 80% of the maximum value. By leaving room for expansion and future growth, you can ensure your system can handle unexpected challenges.

4. Balancing price and power: Jeff shares a rule of thumb when it comes to purchasing a spray system. Avoid going for less than 50% of what you actually need and weigh the price against the value to make a well-informed decision.

5. Planning for the future: Your gallons per minute, pressure, and future plans all come into play when selecting the right spray system. Jeff emphasizes the importance of considering your long-term goals to ensure your system can meet your expanding needs.

Fun Fact: Did you know that our systems can flow up to 8 gallons per minute and handle pressures of up to 175 PSI? That’s some serious spraying power right there!

So, how can you make the most of this valuable information? Head over to our YouTube channel and watch the full video to get all the details straight from the expert himself, Jeff Mattke.

Remember, at Texas Industrial Remcor, it’s all about providing you with quality valves and controls today and tomorrow.

Thanks for being a part of the Texas Industrial Remcor family,

Your Friends at Texas Industrial Remcor.

P.S. Don’t forget to like and subscribe to our channel to stay up-to-date with all the latest videos, tips, and insights about our quality valves and controls.

Best regards,

Texas Industrial Remcor, Inc.

🌐 Visit our website: www.sprayervalves.com

📺 Watch the video: https://youtu.be/FC72Rujx_iQ

📧 Contact us: [email protected]

📞 Call us: 254-982-4236

Posted on by

Boom Sprayer Control System Installation

install 4 of 4
Reading Time: 2 minutes

🚜 Learn how to install the Boom Sprayer Control System in our latest video!

Hey there, loyal subscribers!

We hope you’re doing well and staying safe. We are excited to bring you the latest episode from Texas Industrial Remcor, Inc., where we dive into the installation process of the Boom Sprayer Control System. In this video, we walk you through step-by-step, making it easy for anyone to install and understand. So let’s get right into it!

Here are the 5 key things you’ll learn in this episode:

1. How to switch polarity with the wires in the Boom Sprayer Control System, allowing for negative or positive connections depending on the switch position.

2. The correct method of inserting and tightening a yellow or nylon tube into a fitting using a compression fitting, ensuring a secure connection.

3. Connecting an adapter to the first valve, which is then linked to the pump, providing a seamless flow of fluids.

4. Bringing two wiring harnesses together using a 6 pen weather pack plug, simplifying the electrical connections in the system.

5. Properly running the cab harness out of the back of the cab from the control box, ensuring a clean and organized installation.

Fun fact from the episode: Did you know that the electronic TIR E-Chip™ valve in the Boom Sprayer Control System draws a maximum of 2 amps for about a second and then drops down to a lower amperage? 😲 This feature helps to conserve power and ensures efficient operation of the system.

As we wrap up this episode, we want to remind you that the control box can be conveniently dropped out of the back of the cab and left there during use. Plus, the spray harness stays with the sprayer, while the control box remains with the tractor, making it easy and hassle-free to disconnect.

If you’re interested in learning more about the installation process or looking for quality valves and controls for your agricultural needs, check out the full video on our YouTube channel, Texas Industrial Remcor Official Channel or @TIRValves.

Don’t forget to hit the like button if you enjoyed the video, and subscribe to our channel to stay updated with our latest releases. Your support means the world to us!

Keep an eye out for our upcoming videos, where we’ll be diving deeper into helpful tips and tricks for maintaining and optimizing your agricultural equipment.

Until next time, happy spraying!

Warm regards,

The Texas Industrial Remcor, Inc. Team

🌐 Visit our website: www.sprayervalves.com

📺 Watch the video: https://youtu.be/rLf3jlF_iuw

📧 Contact us: [email protected]

📞 Call us: 254-982-4236

Posted on by

Boom Sprayer Control System Installation Tips

boom install
Reading Time: 2 minutes

Let’s dive right in and see what knowledge we can gain from Part 3 of this 4-part series:

1. Teflon Tape for a Perfect Seal: Instead of using pipe dope, Jeff suggests using teflon tape to ensure a leak-free connection. It’s a small but important step that can save you from possible headaches down the road.

2. Easy Hose Clamp Removal: Jeff recommends using a standard nut driver to loosen hose clamps. This handy tip will make your disassembly process a breeze.

3. Stay Organized: Keeping your hoses organized during the disassembly process will make reassembly a whole lot easier. Jeff shares some smart techniques to keep everything in order.

4. Patience with Lock Nuts: Installing lock nuts can require some extra time and effort to remove them if needed. Jeff sheds some light on this process to make it smoother for you.

5. Modifications and Welding: If necessary, Jeff explains how you can modify or weld the brackets for a perfect fit during installation.

Fun little fact from this episode: Did you know that the brackets for the Boom Sprayer Control System come with standardized drilled holes for easy mounting? It’s these small details that make your installation process a whole lot simpler.

As we wrap up this episode, stay tuned for the next installment where we’ll be getting into the exciting electrical work involved in this installation.

Remember, Texas Industrial Remcor, Inc. is your go-to source for top-quality solenoid valves and controls. We take pride in delivering reliable solutions tailored to your needs.

Before we sign off, here’s your call to action: Don’t forget to hit that like and subscribe button and ring the notification bell so you never miss an episode. Also, feel free to leave any comments or suggestions for future topics you’d like us to cover.

Thanks for being a part of the Texas Industrial Remcor, Inc. family!

Best regards,

Texas Industrial Remcor, Inc.

🌐 Visit our website: www.sprayervalves.com

📺 Watch the video: https://youtu.be/HA0_pv5_1cY

📧 Contact us: [email protected]

📞 Call us: 254-982-4236

Posted on by

3 Boom Sprayer Control System Part 2 of 4

easy 3 boom install part 2
Reading Time: 2 minutes

Hey there, Texas Industrial Remcor fans!

We hope you’re ready for another exciting installment of our YouTube series! In our latest video, titled “3 Boom Sprayer Control System Weather Pack E-Chip™ Install TIR Part 2 of 4,” we dive deeper into the installation process of the boom sprayer control system. If you’ve been following along, you won’t want to miss this!

Here are 5 key things you’ll learn in this episode:

1. How to assemble 3 important fittings for the boom sprayer control system.

2. The correct connection of the return line to the pressure regulator.

3. The tools you’ll need for a successful installation, including a crescent wrench, screwdriver, and more.

4. The types of fittings required for the installation and where you can find them.

5. The step-by-step process of connecting the pressure line to the hose barb.

Fun fact from the episode: did you know that the pressure fitting should be placed into the first solenoid valve? It’s a small detail, but it can make a big difference in the overall functionality of your system! (Note: Except for the 1999 Series)

We hope you enjoy this second part of our 4-part series. Stay tuned for more exciting updates from Texas Industrial Remcor as we continue to deliver valuable content on valves, controls, and more!

Before we wrap up, we wanted to give you a quick call to action. If you haven’t already, make sure to like and subscribe to our YouTube channel so you don’t miss any future episodes. And if you have any specific topics or questions you’d like us to cover in future videos, leave us a comment below!

Thank you for being a part of the Texas Industrial Remcor community. We appreciate your support and can’t wait to share more valuable content with you soon.

Until next time,

The Texas Industrial Remcor Team

🌐 Visit our website: www.sprayervalves.com

📺 Watch the video: https://youtu.be/H0NMLRLWdTs

📧 Contact us: [email protected]

📞 Call us: 254-982-4236

Posted on by

Boom Sprayer Control Systems 1 of 4

three boom install
Reading Time: 2 minutes

Get Ready for a Smooth Installation! 🚜

Hey there, sprayer enthusiasts!

We’re excited to bring you another informative episode from Texas Industrial Remcor, Inc. Today, we’re diving into the world of boom sprayer control systems. In our latest video, “3 Boom Sprayer Control System Weather Pack E-Chip™ Install TIR Part 1 of 4,” we’ll show you how to seamlessly swap out your TIR 3 valve section with our TIR E-Chip™ 3 valve section. So, grab your toolbox and let’s get started!

Here are 5 key takeaways from this episode that you won’t want to miss:

1️⃣ Any TIR 3 valve will do: Whether you have a manual system or one from a competitor, our installation process is applicable across the board. So, don’t worry about compatibility issues!

2️⃣ Quick installation explained: We’ll walk you through the installation process step by step, ensuring you grasp each stage and understand how to seamlessly integrate our TIR E-Chip™ into your spraying system.

3️⃣ It’s a smooth sail: Our system is designed for ease and convenience. You’ll be amazed at how effortlessly everything fits together, allowing you to upgrade your sprayer in no time.

4️⃣ What’s in the box: Expect a carefully packaged product that includes a 3 valve control section, a control panel, a spray harness, and a pressure fitting. We’re all about providing you with everything you need in one neat package!

5️⃣ Trusted quality from TIR: Rest assured, Texas Industrial Remcor is a trusted manufacturer known for our top-notch valves and controls. With our TIR E-Chip™ system, you can rely on superior performance and long-lasting durability.

Fun Fact Time: Did you know that our TIR E-Chip™ system is designed to enhance your spraying precision? With its advanced control capabilities, you’ll be able to achieve optimal coverage and maximize efficiency. Your crops will thank you!

So, hop on over to our YouTube channel and get ready to level up your sprayer game with our enlightening video.

As always, if you haven’t liked and subscribed to our channel yet, hit that like and subscribe button and never miss out on another valuable episode packed with useful tips and tricks.

Keep an eye out for the upcoming Part 2 of this four-part series, where we’ll delve even further into the installation process.

Happy spraying!

The Texas Industrial Remcor Team

🌐 Visit our website: www.sprayervalves.com

📺 Watch the video: https://youtu.be/k-fiGLGt-fc

📧 Contact us: [email protected]

📞 Call us: 254-982-4236