Tag: valves

Posted on by

Find the Perfect Spray System for Your Needs

Reading Time: 2 minutes

Hey there Texas Industrial Remcor fans,

We’ve got a brand new video out that’s going to answer a question we frequently get from our customers: “Which particular spray system do I need for my sprayer?” In this episode, our very own Jeff Mattke breaks it all down for you, providing some valuable insight to help you make an informed decision.

Let’s dive right into the five key takeaways you can expect from this episode:

1. The two crucial variables: Jeff highlights the importance of considering the pressure and gallons per minute when determining the right spray system for your needs. These variables will vary based on your unique requirements, so understanding them is essential.

2. Per valve basis: Jeff explains how our systems at Texas Industrial Remcor are described on a per valve basis. This information becomes handy when you’re looking at specific valve specifications, allowing you to make accurate calculations.

3. The cautionary note: Discover why it’s suggested not to size your application any closer than 80% of the maximum value. By leaving room for expansion and future growth, you can ensure your system can handle unexpected challenges.

4. Balancing price and power: Jeff shares a rule of thumb when it comes to purchasing a spray system. Avoid going for less than 50% of what you actually need and weigh the price against the value to make a well-informed decision.

5. Planning for the future: Your gallons per minute, pressure, and future plans all come into play when selecting the right spray system. Jeff emphasizes the importance of considering your long-term goals to ensure your system can meet your expanding needs.

Fun Fact: Did you know that our systems can flow up to 8 gallons per minute and handle pressures of up to 175 PSI? That’s some serious spraying power right there!

So, how can you make the most of this valuable information? Head over to our YouTube channel and watch the full video to get all the details straight from the expert himself, Jeff Mattke.

Remember, at Texas Industrial Remcor, it’s all about providing you with quality valves and controls today and tomorrow.

Thanks for being a part of the Texas Industrial Remcor family,

Your Friends at Texas Industrial Remcor.

P.S. Don’t forget to like and subscribe to our channel to stay up-to-date with all the latest videos, tips, and insights about our quality valves and controls.

Best regards,

Texas Industrial Remcor, Inc.

🌐 Visit our website: www.sprayervalves.com

📺 Watch the video: https://youtu.be/FC72Rujx_iQ

📧 Contact us: [email protected]

📞 Call us: 254-982-4236

Posted on by

A Quick Guide to Wiring: Hooking Up Systems for Spraying

Reading Time: 2 minutes

Hey there Texas Industrial Remcor fans,

We’re back with another informative video release to help you with all your spraying needs. In this episode, our very own Jeff Mattke delves into the topic of hooking up systems, specifically focusing on the intricate details of wiring. So grab a cup of coffee, sit back, and get ready to learn some valuable insights.

Here are five key takeaways from the video:

1. Wiring the Single Boom Controller: Jeff walks you through the step-by-step process of hooking up the single boom system, explaining which wires go where and how to ensure a proper connection.

2. Understanding the Pressure Regulator: Learn about the positive and negative terminals on the pressure regulator and how to make quick adjustments based on the pressure levels.

3. Polarity and Solenoid Operation: Discover why the polarity of wires doesn’t affect the solenoid operation and how a simple switch can change the direction of the magnetic coil.

4. Hooking Up Multi-Boom Systems: Delve into the more complex wiring of multi-boom systems, including the cab harness and sprayer harness, and uncover the secrets behind connecting all those wires.

5. Replacement Kit: Explore the options available for replacing the rectangular rubber square plugs, as we provide alternative solutions to keep your system running smoothly.

Did you know that TIR stopped producing the style of rubber connectors shown in the video over 15 years ago? So, if you encounter any issues with these connectors, be sure to check out the replacement and repair kits we offer as a cost-effective solution.

That wraps up this episode, folks. We hope you found these wiring tips helpful and insightful. Remember, at Texas Industrial Remcor, we’re committed to providing you with top-quality valves and controls today and tomorrow.

As always, we encourage you to check out our website for additional information and resources. Visit www.sprayervalves.com to explore our range of products and stay up-to-date with the latest news and technology.

If you have any specific topics or challenges you’d like us to cover in future videos, feel free to reach out. We greatly appreciate your feedback and suggestions. Don’t forget to like and subscribe to our YouTube channel for more informative content like this!

Until next time, happy wiring!

Best regards,

Texas Industrial Remcor, Inc.

🌐 Visit our website: www.sprayervalves.com

📺 Watch the video: https://youtu.be/aN2NNOcKeks

📧 Contact us: [email protected]

📞 Call us: 254-982-4236

Posted on by

Boom Sprayer Control System Installation Tips

boom install
Reading Time: 2 minutes

Let’s dive right in and see what knowledge we can gain from Part 3 of this 4-part series:

1. Teflon Tape for a Perfect Seal: Instead of using pipe dope, Jeff suggests using teflon tape to ensure a leak-free connection. It’s a small but important step that can save you from possible headaches down the road.

2. Easy Hose Clamp Removal: Jeff recommends using a standard nut driver to loosen hose clamps. This handy tip will make your disassembly process a breeze.

3. Stay Organized: Keeping your hoses organized during the disassembly process will make reassembly a whole lot easier. Jeff shares some smart techniques to keep everything in order.

4. Patience with Lock Nuts: Installing lock nuts can require some extra time and effort to remove them if needed. Jeff sheds some light on this process to make it smoother for you.

5. Modifications and Welding: If necessary, Jeff explains how you can modify or weld the brackets for a perfect fit during installation.

Fun little fact from this episode: Did you know that the brackets for the Boom Sprayer Control System come with standardized drilled holes for easy mounting? It’s these small details that make your installation process a whole lot simpler.

As we wrap up this episode, stay tuned for the next installment where we’ll be getting into the exciting electrical work involved in this installation.

Remember, Texas Industrial Remcor, Inc. is your go-to source for top-quality solenoid valves and controls. We take pride in delivering reliable solutions tailored to your needs.

Before we sign off, here’s your call to action: Don’t forget to hit that like and subscribe button and ring the notification bell so you never miss an episode. Also, feel free to leave any comments or suggestions for future topics you’d like us to cover.

Thanks for being a part of the Texas Industrial Remcor, Inc. family!

Best regards,

Texas Industrial Remcor, Inc.

🌐 Visit our website: www.sprayervalves.com

📺 Watch the video: https://youtu.be/HA0_pv5_1cY

📧 Contact us: [email protected]

📞 Call us: 254-982-4236